%% Time-stamp: <2013-12-20 19:58:51 vk>
%%%% === Disclaimer: =======================================================
%% created by
%%
%%      Karl Voit
%%
%% using GNU/Linux, GNU Emacs & LaTeX 2e
%%

%doc% %% overriding preamble/preamble.tex %%
%doc% \newcommand{\mylinespread}{1.0}  \newcommand{\mycolorlinks}{true}
%doc% \documentclass[12pt,paper=a4,parskip=half,DIV=calc,oneside,%%
%doc% headinclude,footinclude=false,open=right,bibliography=totoc]{scrartcl}
%doc% \usepackage[utf8]{inputenc}\usepackage[ngerman,american]{babel}\usepackage{scrpage2}
%doc% \usepackage{ifthen}\usepackage{eurosym}\usepackage{xspace}\usepackage[usenames,dvipsnames]{xcolor}
%doc% \usepackage[protrusion=true,factor=900]{microtype}
%doc% \usepackage{enumitem}
%doc% \usepackage[pdftex]{graphicx}
%doc% \usepackage{todonotes}
%doc% \usepackage{dingbat,bbding} %% special characters
%doc% \definecolor{DispositionColor}{RGB}{30,103,182}
%doc%
%doc% \usepackage[backend=biber,style=authoryear,dashed=false,natbib=true,hyperref=true%%
%doc% ]{biblatex}
%doc%
%doc% \addbibresource{references-biblatex.bib} %% remove, if using BibTeX instead of biblatex
%doc%
%doc% %% overriding userdata %%
%doc% \newcommand{\myauthor}{Karl Voit}\newcommand{\mytitle}{LaTeX Template Documentation}
%doc% \newcommand{\mysubject}{A Comprehensive Guide to Use the
%doc% Template from https://github.com/novoid/LaTeX-KOMA-template}
%doc% \newcommand{\mykeywords}{LaTeX, pdflatex, template, documentation, biber, biblatex}
%doc%
%doc% \newcommand{\myLaT}{\LaTeX{}@TUG\xspace}
%doc%
%doc% %% for future use?
%doc% % \usepackage{filecontents}
%doc% % \begin{filecontents}{filename.example}
%doc% %
%doc% % \end{filecontents}
%doc%
%doc%
%doc% %% using existing TeX files %%
%doc% \input{template/mycommands}
%doc% \input{template/typographic_settings}
%doc% \input{template/pdf_settings}
%doc%
%doc% \begin{document}
%doc% %% title page %%
%doc% \title{\mytitle}\subtitle{\mysubject}
%doc% \author{\myauthor}
%doc% \date{\today}
%doc%
%doc% \maketitle\newpage
%doc%
%doc% \tableofcontents\newpage
%doc% %%---------------------------------------%%

%doc%
%doc% \section{How to use this \LaTeX{} document template}
%doc%
%doc% This \LaTeX{} document template from
%doc% \myLaT\footnote{\url{http://LaTeX.TUGraz.at}} is based on \myacro{KOMA}
%doc% script\footnote{\url{http://komascript.de/}}. You don't need any
%doc% special \myacro{KOMA} knowledge (but it woun't hurt either). It provides an easy to use and
%doc% easy to modify template. All settings are documented and many references to
%doc% additional information sources are given.
%doc%

%doc% In general, there should not be any reason to modify a file in
%doc% the \texttt{template} folder. \emph{All important settings are
%doc% accessible in the main folder, mostly in the \texttt{main.tex}
%doc% file.} This way, it is easy to get what you need and you can update
%doc% the template independent of the content of the document.
%doc%
%doc% \newcommand{\myimportant}{%% mark important chapters
%doc%   \marginpar{\vspace{-1em}\rightpointleft}
%doc% }
%doc% \newcommand{\myinteresting}{\marginpar{\vspace{-2em}\PencilLeftDown}}

%doc%
%doc% The \emph{absolute minimum you should read} is listed below and
%doc% marked with the hand symbol:\myimportant
%doc% \begin{itemize}
%doc% \item Section~\ref{sec:modifytemplate}: basic configuration of this template.
%doc% \item Section~\ref{sec:howtocompile}: how to generate the \myacro{PDF} file
%doc% \item Section~\ref{sec:references}: using biblatex (instead of bibtex)
%doc% \end{itemize}
%doc%
%doc% In order to get a perfect resulting document and to get an
%doc% exciting experience with this template, you should definitely consider reading
%doc% following sections which are also marked with the pencil symbol:\myinteresting
%doc% \begin{itemize}
%doc% \item Section~\ref{sec:extending-template}: extend the template with
%doc%   your own usepackages, newcommands, and so forth
%doc% \item Section~\ref{sec:mycommands}: pre-defined commands to make your life easier (e.g., including graphics)
%doc% \item Section~\ref{sec:myacro}: how to do acronyms (like \myacro{ACME}) beautifully
%doc% \item Section~\ref{sub:csquotes}: how to \enquote{quote} text and use parentheses correctly
%doc% \end{itemize}
%doc%
%doc% The other sections describe all other settings for the sake of completeness. This is
%doc% interesting for learning more about \LaTeX{} and modifying this template to a higher level of detail.

%doc%
%doc% \newpage
%doc% \subsection{Six Steps to Customize Your Document}\myimportant
%doc% \label{sec:modifytemplate}
%doc%
%doc% This template is optimized to get to the first draft of your thesis
%doc% very quickly. Follow these instructions and you get most of your
%doc% customizing done in a few minutes:
%doc%
%doc% \newcommand{\myfile}[1]{\texttt{\href{file:#1}{#1}}}
%doc%
%doc% \begin{enumerate}
%doc% \item Modify settings in \texttt{main.tex} to meet your requirements:
%doc%   \begin{itemize}
%doc%   \item Basic settings
%doc%     \begin{itemize}
%doc%     \item Paper size, languages, font size, citation style,
%doc%           title page, and so forth
%doc%     \end{itemize}
%doc%   \item Document metadata
%doc%     \begin{itemize}
%doc%     \item Preferences like \verb+myauthor+, \verb+mytitle+, and so forth
%doc%     \end{itemize}
%doc%   \end{itemize}
%doc% \item Replace \myfile{figures/institution.pdf} with the logo of
%doc% your institution in either \myacro{PDF} or \myacro{PNG}
%doc% format.\footnote{Avoid \myacro{JPEG} format for
%doc% computer-generated (pixcel-oriented) graphics like logos or
%doc% screenshots in general. The \myacro{JEPG} format is for
%doc% photographs \emph{only}.}
%doc% \item Further down in \myfile{main.tex}:
%doc%   \begin{itemize}
%doc%   \item Create your desired structure for the chapters
%doc%         (\verb+\include{introduction}+, \verb+\include{evaluation}+, \ldots)
%doc%   \end{itemize}
%doc% \item Create the \TeX{} files and fill your content into these files you defined in the previous step.
%doc% \item Optionally: Modify \myfile{colophon.tex} to meet your situation.
%doc%   \begin{itemize}
%doc%   \item Please spend a couple of minutes and think about putting your work
%doc%         under an open license\footnote{\url{https://creativecommons.org/licenses/}}
%doc%         in order to follow the spirit of Open Science\footnote{\url{https://en.wikipedia.org/wiki/Open_science}}.
%doc%   \end{itemize}
%doc% \item In case you are using \myacro{GNU} make\footnote{If you
%doc%       don't know, what \myacro{GNU} make is, you are not using it (yet).}:
%doc%       Put your desired \myacro{PDF} file name in the second line of file
%doc%    \myfile{Makefile}
%doc%    \begin{itemize}
%doc%    \item replace \enquote{Projectname} with your filename
%doc%    \item do not use any file extension like \texttt{.tex} or \texttt{.pdf}
%doc%    \end{itemize}
%doc% \end{enumerate}
%doc%
%doc%

%doc%
%doc% \subsection{License}\myimportant
%doc% \label{sec:license}
%doc%
%doc% This template is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
%doc%         license\footnote{\url{https://creativecommons.org/licenses/by-sa/3.0/}}:
%doc%     \begin{itemize}
%doc%     \item You can share (to copy, distribute and transmit) this template.
%doc%     \item You can remix (adapt) this template.
%doc%     \item You can make commercial use of the template.
%doc%     \item In case you modify this template and share the derived
%doc%           template: You must attribute the template such that you do not
%doc%           remove (co-)authorship of Karl Voit and you must not remove
%doc%           the URL to the original repository on
%doc%           github\footnote{\url{https://github.com/novoid/LaTeX-KOMA-template}}.
%doc%     \item If you alter, transform, or build a new template upon
%doc%           this template, you may distribute the resulting
%doc%           template only under the same or similar license to this one.
%doc%     \item There are \emph{no restrictions} of any kind, however, related to the
%doc%           resulting (PDF) document!
%doc%     \item You may remove the colophon (but it's not recommended).
%doc%     \end{itemize}


%doc%
%doc%
%doc% \subsection{How to compile this document}\myimportant
%doc% \label{sec:howtocompile}
%doc%
%doc% I assume that compiling \LaTeX{} documents within your software
%doc% environment is something you have already learned. This template is
%doc% almost like any other \LaTeX{} document except it uses
%doc% state-of-the-art tools for generating things like the list of
%doc% references using biblatex/biber (see
%doc% Section~\ref{sec:references} for details). Unfortunately, some \LaTeX{} editors
%doc% do not support this much better way of working with bibliography
%doc% references yet. This section describes how to compile this template.
%doc%
%doc% \subsubsection{Compiling Using a \LaTeX{} Editor}
%doc%
%doc% Please do select \myfile{main.tex} as the \enquote{main project file} or make
%doc% sure to compile/run only \myfile{main.tex} (and not \myfile{introduction.tex}
%doc% or other \TeX{} files of this template).
%doc%
%doc% Choose \texttt{biber} for generating the references. Modern LaTeX{}
%doc% environments offer this option. Older tools might not be that up to
%doc% date yet.
%doc%

%doc% \subsubsection{Activating \texttt{biber} in the \LaTeX{} editor TeXworks}
%doc% \label{sec:biberTeXworks}
%doc%
%doc% The \href{https://www.tug.org/texworks/}{TeXworks} editor is a very
%doc% basic (but fine) \LaTeX{} editor to start with. It is included in
%doc% \href{http://miktex.org/}{MiKTeX} and
%doc% \href{http://miktex.org/portable}{MiKTeX portable} and supports
%doc% \href{https://en.wikipedia.org/wiki/Syntax_highlighting}{syntax
%doc%   highlighting} and
%doc% \href{http://itexmac.sourceforge.net/SyncTeX.html}{SyncTeX} to
%doc% synchronize \myacro{PDF} output and \LaTeX{} source code.
%doc%
%doc% Unfortunately, TeXworks shipped with MiKTeX does not support compiling
%doc% using \texttt{biber} (biblatex) out of the box. Here is a solution to
%doc% this issue. Go to TeXworks: \texttt{Edit} $\rightarrow$
%doc% \texttt{Preferences~\ldots} $\rightarrow$ \texttt{Typesetting} $\rightarrow$
%doc% \texttt{Processing tools} and add a new entry (using the plus icon):
%doc%
%doc% \begin{tabbing}
%doc%   Arguments: \= foobar  \kill
%doc%   Name:      \> \verb#pdflatex+biber# \\
%doc%   Program:   \> \emph{find the \texttt{template/pdflatex+biber.bat} file from your disk} \\
%doc%   Arguments: \> \verb+$fullname+ \\
%doc%              \> \verb+$basename+
%doc% \end{tabbing}
%doc%
%doc% Activate the \enquote{View PDF after running} option.
%doc%
%doc% Close the preferences dialog and you will now have an additional
%doc% choice in the drop down list for compiling your document. Choose the
%doc% new entry called \verb#pdflatex+biber# and start a happier life with
%doc% \texttt{biber}.
%doc%
%doc% In case your TeXworks has a German user interface, here the key
%doc% aspects in German as well:
%doc%
%doc% \begin{otherlanguage}{ngerman}
%doc%
%doc%   \texttt{Bearbeiten} $\rightarrow$ \texttt{Einstellungen~\ldots} $\rightarrow$
%doc%   \texttt{Textsatz} $\rightarrow$ \texttt{Verarbeitungsprogramme} $\rightarrow$
%doc%   + \emph{(neues Verarbeitungsprogramm)}:
%doc%
%doc% \begin{tabbing}
%doc%   Befehl/Datei: \= foobar  \kill
%doc%     Name: \> pdflatex+biber \\
%doc%     Befehl/Datei: \> \emph{die \texttt{template/pdflatex+biber.bat} im Laufwerk suchen} \\
%doc%     Argumente: \> \verb+$fullname+ \\
%doc%                \> \verb+$basename+
%doc% \end{tabbing}
%doc%
%doc% \enquote{PDF nach Beendigung anzeigen} aktivieren.
%doc%
%doc% \end{otherlanguage}
%doc%

%doc% \subsubsection{Compiling Using \myacro{GNU} make}
%doc%
%doc% With \myacro{GNU}
%doc% make\footnote{\url{https://secure.wikimedia.org/wikipedia/en/wiki/Make\_\%28software\%29}}
%doc% it is just simple as that: \texttt{make pdf}
%doc%
%doc% Several other targets are available. You can check them out by
%doc% executing: \texttt{make help}
%doc%
%doc% In case you are using TeXLive (instead of MiKTeX as I do), you might
%doc% want to modify the line \texttt{PDFLATEX\_CMD = pdflatex} within
%doc% the file \texttt{Makefile} to: \texttt{PDFLATEX\_CMD = pdflatex -synctex=1 -undump=pdflatex}
%doc%
%doc%

%doc% \subsubsection{Compiling in a Text-Shell}
%doc%
%doc% To generate a document using \texttt{Biber}, you can stick to
%doc% following example:
%doc% \begin{verbatim}
%doc% pdflatex main.tex
%doc% biber main
%doc% pdflatex main.tex
%doc% pdflatex main.tex
%doc% \end{verbatim}
%doc% 
%doc% Users of TeXLive with Microsoft Windows might want to try the
%doc% following script\footnote{Thanks to Florian Brucker for provinding
%doc%   this script.} which could be stored as, e.g., \texttt{compile.bat}:
%doc% \begin{verbatim}
%doc% REM call pdflatex using parameters suitable for TeXLive:
%doc% pdflatex.exe  "main.tex"
%doc% REM generate the references metadata for biblatex (using biber):
%doc% biber.exe "main"
%doc% REM call pdflatex twice to compile the references and finalize PDF:
%doc% pdflatex.exe  "main.tex"
%doc% pdflatex.exe -synctex=-1 -interaction=nonstopmode "main.tex"
%doc% \end{verbatim}
%doc% 


%doc%
%doc% \subsection{How to get rid of the template documentation}
%doc%
%doc% Simply remove the files \verb#Template_Documentation.pdf# and
%doc% \verb#Template_Documentation.tex# (if it exists) in the main folder
%doc% of this template.
%doc%
%doc% \subsection{What about modifying or extending the template?}\myinteresting
%doc% \label{sec:extending-template}
%doc%
%doc% This template provides an easy to start \LaTeX{} document template with sound
%doc% default settings. You can modify each setting any time. It is recommended that
%doc% you are familiar with the documentation of the command whose settings you want
%doc% to modify.
%doc%
%doc% It is recommended that for \emph{adding} things to the preambel (newcommands,
%doc% setting variables, defining headers, \dots) you should use the file
%doc% \texttt{main.tex}.
%doc% There are comment lines which help you find the right spot.
%doc% This way you still have the chance to update your \texttt{template}
%doc% folder from the template repository without losing your own added things.
%doc%
%doc% The following sections describe the settings and commands of this template and
%doc% give a short overview of its features.

%doc% \subsection{How to change the title page}
%doc%
%doc% This template comes with a variety of title pages. They are located in
%doc% the folder \texttt{template}. You can switch to a specific title
%doc% page by including the corresponding title page file in the file
%doc% \texttt{main.tex}.
%doc%
%doc% Please note that you may not need to modify any title page document by
%doc% yourself since all relevant information is defined in the file
%doc% \texttt{main.tex}.

%doc%
%doc% \section{\texttt{preamble.tex} --- Main preamble file}
%doc%
%doc% In the file \verb#preamble/preamble.tex# you will find the basic
%doc% definitions related to your document. This template uses the \myacro{KOMA} script
%doc% extension package of \LaTeX{}.
%doc%
%doc% There are comments added to the \verb#\documentclass{}# definitions. Please
%doc% refer to the great documentation of \myacro{KOMA}\footnote{\texttt{scrguide.pdf} for
%doc% German users} for further details.
%doc%
%doc% \paragraph{What should I do with this file?} For standard purposes you might
%doc% use the default values it provides. You must not remove its \texttt{include} command
%doc% in \texttt{main.tex} since it contains important definitions. This file contains
%doc% settings which are documented well and can be modified according to your needs.
%doc% It is recommended that you fully understand each setting you modify in order to
%doc% get a good document result. However, you can set basic values in the
%doc% \texttt{main.tex} file: font size, paper size,
%doc% paragraph separation mode, draft mode, binding correction, and whether
%doc% your document will be a one sided document or you are planning to
%doc% create a document which is printed on both, left side and right side.
%doc%

\documentclass[%
fontsize=\myfontsize,%% size of the main text
paper=\mypapersize,  %% paper format
parskip=\myparskip,  %% vertical space between paragraphs (instead of indenting first par-line)
DIV=calc,            %% calculates a good DIV value for type area; 66 characters/line is great
headinclude=true,    %% is header part of margin space or part of page content?
footinclude=false,   %% is footer part of margin space or part of page content?
open=right,          %% "right" or "left": start new chapter on right or left page
appendixprefix=true, %% adds appendix prefix; only for book-classes with \backmatter
bibliography=totoc,  %% adds the bibliography to table of contents (without number)
listof=totoc,
draft=\mydraft,      %% if true: included graphics are omitted and black boxes
                     %%          mark overfull boxes in margin space
BCOR=\myBCOR,        %% binding correction (depends on how you bind
                     %% the resulting printout.
\mylaterality        %% oneside: document is not printed on left and right sides, only right side
                     %% twoside: document is printed on left and right sides
]{scrbook}  %% article class of KOMA: "scrartcl", "scrreprt", or "scrbook".
            %% CAUTION: If documentclass will be changed, *many* other things
            %%          change as well like heading structure, ...



% FIXXME: adopting class usage:
% from scrbook -> scrartcl OR scrreport:
% - remove appendixprefix from class options
% - remove \frontmatter \mainmatter \backmatter \appendix from main.tex

% FIXXME: adopting language:
% add or modify language parameter of package »babel« and use language switches described in babel-documentation

%doc%
%doc% \subsection{\texttt{inputenc}: UTF8 as input charset}
%doc%
%doc% You are able and should use \myacro{UTF8} character settings for writing these \TeX{}-files.
%doc%
%\usepackage{ucs}             %% UTF8 as input characters; UCS incompatible to biblatex
\usepackage[utf8]{inputenc} %% UTF8 as input characters
%% Source: http://latex.tugraz.at/latex/tutorial#laden_von_paketen


%doc%
%doc% \subsection{\texttt{babel}: Language settings}
%doc%
%doc% The default setting of the language is American. Please change settings for
%doc% additional or alternative languages used in \texttt{main.tex}.
%doc%
%doc% Please note that the default language of the document is the \emph{last} language
%doc% which is added to the package options.
%doc%
%doc% To set only parts of your document in a different language as the rest, use for example
%doc% \verb+\foreignlanguage{ngerman}{Beispieltext in deutscher Sprache}+.
%doc% For using foreign language quotes, please refer to the \verb+\foreignquote+,
%doc% \verb+\foreigntextquote+, or \verb+\foreignblockquote+ provided by
%doc% \texttt{csquotes} (see Section~\ref{sub:csquotes}).
%doc%
\usepackage[\mylanguage]{babel}  %% used languages; default language is *last* language of options

%doc%
%doc% \subsection{\texttt{scrpage2}: Headers and footers}
%doc%
%doc% Since this template is based on \myacro{KOMA} script it uses its great \texttt{scrpage2}
%doc% package for defining header and footer information. Please refer to the \myacro{KOMA}
%doc% script documentation how to use this package.
%doc%
\usepackage{scrpage2} %%  advanced page style using KOMA


%doc%
%doc% \subsection{References}\myimportant
%doc% \label{sec:references}
%doc%
%doc% This template is using
%doc% \href{http://www.tex.ac.uk/tex-archive/info/translations/biblatex/de/}{\texttt{biblatex}}
%doc% and \href{http://en.wikipedia.org/wiki/Biber_(LaTeX)}{\texttt{Biber}}
%doc% instead of
%doc% \href{http://en.wikipedia.org/wiki/BibTeX}{\textsc{Bib}\TeX{}}. This has the following
%doc% advantages:
%doc% \begin{itemize}
%doc% \item better documentation
%doc% \item Unicode-support like German umlauts (ö, ä, ü, ß) for references
%doc% \item flexible definition of citation styles
%doc% \item multiple bibliographies e.\,g. for printed and online resources
%doc% \item cleaner reference definition e.\,g. inheriting information from
%doc%   \texttt{Proceedings} to all related \texttt{InProceedings}
%doc% \item modern implementation
%doc% \end{itemize}
%doc%
%doc% In short, \texttt{biblatex} is able to handle your \texttt{bib}-files
%doc% and offers additional features. To get the most out of
%doc% \texttt{biblatex}, you should read the very good package
%doc% documentation. Be warned: you'll probably never want to change back
%doc% to \textsc{Bib}\TeX{} again.
%doc%
%doc% Take a look at the files \texttt{references-bibtex.bib} and
%doc% \texttt{references-biblatex.bib}: they contain the three
%doc% references \texttt{tagstore}, \texttt{Voit2009}, and
%doc% \texttt{Voit2011}.
%doc% The second file is optimized for \texttt{biblatex} and
%doc% takes advantage of some features that are not possible with
%doc% \textsc{Bib}\TeX{}.
%doc%
%doc% This template is ready to use \texttt{biblatex} with \texttt{Biber} as
%doc% reference compiler. You should make sure that you have installed an up
%doc% to date binary of \texttt{Biber} from its
%doc% homepage\footnote{\url{http://biblatex-biber.sourceforge.net/}}.
%doc%
%doc%
%doc% In \texttt{main.tex} you can define several general \texttt{biblatex}
%doc% options: citation style, whether or not multiple occurrences of
%doc% authors are replaced with dashes, or if backward references (from
%doc% references to citations) should be added.
%doc%
%doc%
%doc% If you are using the LaTeX{} editor TeXworks, please make sure that
%doc% you have read Section~\ref{sec:biberTeXworks} in order to use
%doc% \texttt{biber}.
%doc%

%doc% \subsubsection{Example citation commands}
%doc%
%doc% This section demonstrates some example citations using the style \texttt{authoryear}.
%doc% You can change the citation style in \texttt{main.tex} (\texttt{mybiblatexstyle}).
%doc%
%doc% \begin{itemize}
%doc% \item cite \cite{Eijkhout2008} and cite \cite{Bringhurst1993, Eijkhout2008}.
%doc% \item citet \citet{Eijkhout2008} and citet \citet{Bringhurst1993, Eijkhout2008}.
%doc% \item autocite \autocite{Eijkhout2008} and autocite \autocite{Bringhurst1993, Eijkhout2008}.
%doc% \item autocites \autocites{Eijkhout2008} and autocites \autocites{Bringhurst1993, Eijkhout2008}.
%doc% \item citeauthor \citeauthor{Eijkhout2008} and citeauthor \citeauthor{Bringhurst1993, Eijkhout2008}.
%doc% \item citetitle \citetitle{Eijkhout2008} and citetitle \citetitle{Bringhurst1993, Eijkhout2008}.
%doc% \item citeyear \citeyear{Eijkhout2008} and citeyear \citeyear{Bringhurst1993, Eijkhout2008}.
%doc% \item textcite \textcite{Eijkhout2008} and textcite \textcite{Bringhurst1993, Eijkhout2008}.
%doc% \item smartcite \smartcite{Eijkhout2008} and smartcite \smartcite{Bringhurst1993, Eijkhout2008}.
%doc% \item footcite \footcite{Eijkhout2008} and footcite \footcite{Bringhurst1993, Eijkhout2008}.
%doc% \item footcite with page \footcite[p.42]{Eijkhout2008} and footcite with page \footcite[compare][p.\,42]{Eijkhout2008}.
%doc% \item fullcite \fullcite{Eijkhout2008} and fullcite \fullcite{Bringhurst1993, Eijkhout2008}.
%doc% \end{itemize}
%doc%
%doc% Please note that the citation style as well as the bibliography style
%doc% can be changed very easily. Refer to the settings in
%doc% \texttt{main.tex} as well as the very good documentation of \texttt{biblatex}.
%doc%

%doc% \subsubsection{Using this template with \myacro{APA} style}
%doc%
%doc% First, you have to have the \myacro{APA} biblatex style
%doc% installed. Modern \LaTeX{} distributions do come with
%doc% \texttt{biblatex} and \myacro{APA} style. If so, you will find the
%doc% files \texttt{biblatex-apa.pdf} (style documentation) and
%doc% \texttt{biblatex-apa-test.pdf} (file with citation examples) on your
%doc% hard disk.
%doc%
%doc% \begin{enumerate}
%doc% \item Change the style according to \verb#\newcommand{\mybiblatexstyle}{apa}#
%doc% \item Add \verb#\DeclareLanguageMapping{american}{american-apa}# or \\
%doc%   \verb#\DeclareLanguageMapping{german}{german-apa}# to your
%doc%   preamble\footnote{You might want to use section \enquote{MISC
%doc%       self-defined commands and settings} for this.}
%doc% \end{enumerate}
%doc%
%doc% These steps change the biblatex style to \myacro{APA} style

%doc%
%doc% \subsubsection{Using this template with \textsc{Bib}\TeX{}}
%doc%
%doc% If you do not want to use \texttt{Biber} and \texttt{biblatex}, you
%doc% have to change several things:
%doc% \begin{itemize}
%doc% \item in \verb#preamble/preamble.tex#
%doc%   \begin{itemize}
%doc%   \item remove the usepackage command of \texttt{biblatex}
%doc%   \item remove the \verb#\addbibresource{...}# command
%doc%   \end{itemize}
%doc% \item in \verb#main.tex#
%doc%   \begin{itemize}
%doc%   \item replace \verb=\printbibliography= with the usual
%doc%     \verb=\bibliographystyle{yourstyle}= and \verb=\bibliography{yourbibfile}=
%doc%   \end{itemize}
%doc% \item if you are using \myacro{GNU} \texttt{make}: modify \verb=Makefile=
%doc%   \begin{itemize}
%doc%   \item replace \verb#BIBTEX_CMD = biber# with \verb#BIBTEX_CMD = bibtex#
%doc%   \end{itemize}
%doc% \item Use the reference file \texttt{references-bibtex.bib}
%doc%   instead of \texttt{references-biblatex.bib}
%doc% \end{itemize}
%doc%
%doc%
\usepackage[backend=biber, %% using "biber" to compile references (instead of "biblatex")
style=\mybiblatexstyle, %% see biblatex documentation
%style=alphabetic, %% see biblatex documentation
dashed=\mybiblatexdashed, %% do *not* replace recurring reference authors with a dash
backref=\mybiblatexbackref, %% create backlings from references to citations
natbib=true, %% offering natbib-compatible commands
hyperref=true, %% using hyperref-package references
]{biblatex}  %% remove, if using BibTeX instead of biblatex

\addbibresource{\mybiblatexfile} %% remove, if using BibTeX instead of biblatex



%doc%
%doc% \subsection{Miscellaneous packages} \label{subsec:miscpackages}
%doc%
%doc% There are several packages included by default. You might want to activate or
%doc% deactivate them according to your requirements:
%doc%
%doc% \begin{enumerate}

%doc% \item[\texttt{\href{http://www.ctan.org/pkg/graphicx}{%%
%doc% graphicx%%
%doc% }}]
%doc% The widely used package to use graphical images within a \LaTeX{} document.
\usepackage[pdftex]{graphicx}

%doc% \item[\texttt{\href{https://secure.wikimedia.org/wikibooks/en/wiki/LaTeX/Formatting\#Other\_symbols}{%%
%doc% pifont%%
%doc% }}]
%doc% For additional special characters available by \verb#\ding{}#
\usepackage{pifont}


%doc% \item[\texttt{\href{http://ctan.org/pkg/ifthen}{%%
%doc% ifthen%%
%doc% }}]
%doc% For using if/then/else statements for example in macros
\usepackage{ifthen}

%% pre-define ifthen-boolean variables:
\newboolean{myaddcolophon}
\newboolean{myaddlistoftodos}


%doc% \item[\texttt{\href{http://www.ctan.org/tex-archive/fonts/eurosym}{%%
%doc% eurosym%%
%doc% }}]
%doc% Using the character for Euro with \verb#\officialeuro{}#
%\usepackage{eurosym}

%doc% \item[\texttt{\href{http://www.ctan.org/tex-archive/help/Catalogue/entries/xspace.html}{%%
%doc% xspace%%
%doc% }}]
%doc% This package is required for intelligent spacing after commands
\usepackage{xspace}

%doc% \item[\texttt{\href{https://secure.wikimedia.org/wikibooks/en/wiki/LaTeX/Colors}{%%
%doc% xcolor%%
%doc% }}]
%doc% This package defines basic colors. If you want to get rid of colored links and headings
%doc% please change corresponding value in \texttt{main.tex} to \{0,0,0\}.
\usepackage[usenames,dvipsnames]{xcolor}
\definecolor{DispositionColor}{RGB}{\mydispositioncolor} %% used for links and so forth in screen-version

%doc% \item[\texttt{\href{http://www.ctan.org/pkg/ulem}{%%
%doc% ulem%%
%doc% }}]
%doc% This package offers strikethrough command \verb+\sout{foobar}+.
\usepackage[normalem]{ulem}

%doc% \item[\texttt{\href{http://www.ctan.org/pkg/framed}{%%
%doc% framed%%
%doc% }}]
%doc% Create framed, shaded, or differently highlighted regions that can
%doc% break across pages.  The environments defined are
%doc% \begin{itemize}
%doc%   \item framed: ordinary frame box (\verb+\fbox+) with edge at margin
%doc%   \item shaded: shaded background (\verb+\colorbox+) bleeding into margin
%doc%   \item snugshade: similar
%doc%   \item leftbar: thick vertical line in left margin
%doc% \end{itemize}
\usepackage{framed}

%doc% \item[\texttt{\href{http://www.ctan.org/pkg/eso-pic}{%%
%doc% eso-pic%%
%doc% }}]
%doc% For example on title pages you might want to have a logo on the upper right corner of
%doc% the first page (only). The package \texttt{eso-pic} is able to place things on absolute
%doc% and relative positions on the whole page.
\usepackage{eso-pic}

%doc% \item[\texttt{\href{http://ctan.org/pkg/enumitem}{%%
%doc% enumitem%%
%doc% }}]
%doc% This package replaces the built-in definitions for enumerate, itemize and description.
%doc% With \texttt{enumitem} the user has more control over the layout of those environments.
\usepackage{enumitem}

%doc% \item[\texttt{\href{http://www.ctan.org/tex-archive/macros/latex/contrib/todonotes/}{%%
%doc% todonotes%%
%doc% }}]
%doc% This packages is \emph{very} handy to add notes\footnote{\texttt{todonotes} replaced
%doc% the \texttt{fixxme}-command which previously was defined in the
%doc% \texttt{preamble\_mycommands.tex} file.}. Using for example \verb#\todo{check}#
%doc% results in something like this \todo{check} in the document. Do read the
%doc% great package documentation for usage of other very helpful commands such as
%doc% \verb#\missingfigure{}# and \verb#\listoftodos#. The latter one creates an index of all
%doc% open todos which is very useful for getting an overview of open issues.
%doc% The package \texttt{todonotes} require the packages \texttt{ifthen}, \texttt{xkeyval}, \texttt{xcolor},
%doc% \texttt{tikz}, \texttt{calc}, and \texttt{graphicx}. Activate
%doc% and configure \verb#\listoftodos# in \texttt{main.tex}.
%\usepackage{todonotes}
\usepackage[\mytodonotesoptions]{todonotes}  %% option "disable" removes all todonotes output from resulting document

%disabled% \item[\texttt{\href{http://www.ctan.org/tex-archive/macros/latex/contrib/blindtext}{%%
%disabled% blindtext%%
%disabled% }}]
%disabled% This package is used to generate blind text for demonstration purposes.
%disabled% %% This is undocumented due to problems using american english; author informed
%disabled% \usepackage{blindtext}  %% provides commands for blind text:
%disabled% %% \blindtext creates some text,
%disabled% %% \Blindtext creates more text.
%disabled% %% \blinddocument creates a small document with sections, lists...
%disabled% %% \Blinddocument creates a large document with sections, lists...
%% 2012-03-10: vk: author published a corrected version which is able to handle "american english" as well. Did not have time to check new package version for this template here.

%doc% \item[\texttt{\href{http://ctan.org/tex-archive/macros/latex/contrib/units}{%%
%doc% units%%
%doc% }}]
%doc% For setting correctly typesetted units and nice fractions with \verb+\unit[42]{m}+ and \verb+\unitfrac[100]{km}{h}+.
\usepackage{units}


%doc% \end{enumerate}




%%%% End
%%% Local Variables:
%%% TeX-master: "../main"
%%% mode: latex
%%% mode: auto-fill
%%% mode: flyspell
%%% eval: (ispell-change-dictionary "en_US")
%%% End:
%% vim:foldmethod=expr
%% vim:fde=getline(v\:lnum)=~'^%%%%'?0\:getline(v\:lnum)=~'^%doc.*\ .\\%(sub\\)\\?section{.\\+'?'>1'\:'1':
