initial commit

DLP.ini

@@ -0,0 +1,12 @@
+# generated by Slic3r 1.3.1-dev on Thu May 30 20:49:23 2019
+bottom_exposure_time = 7
+bottom_layers = 3
+display = 0
+exposure_time = 2
+invert_y = 0
+offset = 0,0
+settle_time = 1.5
+show_bed = 1
+z_lift = 5
+z_lift_speed = 8
+zoom = 100

filament/2020.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #008706
+filament_cost = 0
+filament_density = 0
+filament_diameter = 2.9
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 80
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 12
+start_filament_gcode = "; Filament gcode\n"
+temperature = 205

filament/grun.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.2
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #008706
+filament_cost = 0
+filament_density = 0
+filament_diameter = 2.9
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 195
+max_fan_speed = 80
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 12
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

filament/k8200_pla_standard_new.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_cost = 0
+filament_density = 0
+filament_diameter = 3
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
+max_fan_speed = 80
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 12
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

filament/orange.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FF8200
+filament_cost = 0
+filament_density = 0
+filament_diameter = 2.92
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 12
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

filament/schnell.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_cost = 0
+filament_density = 0
+filament_diameter = 3
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 2
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

filament/schwarz.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #000000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 2.95
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
+max_fan_speed = 80
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 12
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

filament/thin_gray.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:45:55
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = new_extruder
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #C2C2C2
+filament_cost = 23
+filament_density = 1.25
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 201
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200

filament/vase.ini

@@ -0,0 +1,25 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1.1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_cost = 0
+filament_density = 0
+filament_diameter = 3
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 190
+max_fan_speed = 100
+min_fan_speed = 80
+min_print_speed = 50
+slowdown_below_layer_time = 0
+start_filament_gcode = "; Filament gcode\n"
+temperature = 190

print/2019.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 20%
+fill_gaps = 1
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 1
+infill_overlap = 15%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 50
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 5
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 15
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = -0.5

print/2020.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 150%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 1
+infill_overlap = 15%
+infill_speed = 60
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 50
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 4
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 150%
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 15
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 15
+top_solid_layers = 3
+travel_speed = 80
+xy_size_compensation = 0

print/autospeed.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 0
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 0
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 55
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 3
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 0
+perimeters = 3
+post_process = /home/lukas/Slic3r/utils/post-processing/filament-weight.pl
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 0
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 0
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 3
+travel_speed = 150
+xy_size_compensation = -0.5

print/autowidth.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 3
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = /home/lukas/Slic3r/utils/post-processing/filament-weight.pl
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = -0.5

print/beta.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 1
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 10%
+fill_gaps = 1
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/carcassonne.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 40%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 4
+travel_speed = 200
+xy_size_compensation = 0

print/chain.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 1
+extrusion_width = 100%
+fill_angle = 0
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/clip.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 30
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 100%
+fill_gaps = 1
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 110%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 15
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 25
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 20
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 20
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 25
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 46
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 15
+top_solid_layers = 3
+travel_speed = 80
+xy_size_compensation = 0

print/gerhard.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = random
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/k8200_pla_standard_erster_druck.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 0%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = random
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/k8200_pla_standard_new.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 110%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 46
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/k8200_pla_standard_new_eigen.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 110%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/kuchen.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 1
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 10%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 5
+travel_speed = 200
+xy_size_compensation = 0

print/langsam.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 100%
+fill_gaps = 1
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 10
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 8
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = random
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 8
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 10
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 50
+xy_size_compensation = 0

print/normal support.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 3
+support_material_interface_spacing = 1
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/normal.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 20%
+fill_gaps = 1
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 1
+infill_overlap = 15%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 50
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 5
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 30
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 15
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = -0.5

print/normal_ew.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/normal_mehr_material.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 20%
+fill_gaps = 1
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 1
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 50
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 5
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 30
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 15
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = -0.5

print/rpi-halt.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 20
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 20
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 100%
+fill_gaps = 1
+fill_pattern = concentric
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 100
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 20
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 20
+perimeters = 8
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = random
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 20
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 20
+travel_speed = 50
+xy_size_compensation = 0

print/slow.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 1
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 90%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 70
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 50%
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 15
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 6
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 20
+perimeters = 3
+post_process = /home/lukas/Slic3r/utils/post-processing/filament-weight.pl
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = nearest
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 10
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50%
+top_solid_layers = 3
+travel_speed = 40
+xy_size_compensation = -0.5

print/support.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 0
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 25%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = random
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 1
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 3
+travel_speed = 200
+xy_size_compensation = 0

print/vase.ini

@@ -0,0 +1,106 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_connections_width = 0
+brim_ears = 0
+brim_ears_max_angle = 125
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 95%
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 100%
+fill_angle = 45
+fill_density = 0%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 130%
+first_layer_height = 0.3
+first_layer_speed = 85%
+gap_fill_speed = 50
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 170%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 55%
+infill_speed = 50
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.25
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 0
+min_shell_thickness = 0
+min_skirt_length = 0
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 170%
+perimeter_speed = 30
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = support_material
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+small_perimeter_speed = 30
+solid_infill_below_area = 10
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 110%
+solid_infill_speed = 50
+spiral_vase = 1
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = pillars
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+top_infill_extrusion_width = 110%
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 80%
+top_solid_layers = 0
+travel_speed = 200
+xy_size_compensation = 0

printer/2020.ini

@@ -0,0 +1,42 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+fan_percentage = 0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.5
+octoprint_apikey = 7C33C4DFB034403CA49FF5E1E8E0A5E3
+pressure_advance = 0
+print_host = localhost:5000
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0.1
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG90 ; use absolute coordinates\nG21 ; set units to millimeters\nG92 E0\nM82 ; use absolute distances for extrusion\nM109 S190 ; wait for temperature to be reached\nG1 Z5 F5000 ; lift the nozzle\nG1 E10 F400 ; prime the nozzle
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

printer/k8200_pla_standard_new.ini

@@ -0,0 +1,42 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+fan_percentage = 0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.5
+octoprint_apikey = 4B7798C4ABCD4026BFBA40855EDB1564
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0.1
+retract_restart_extra_toolchange = 0
+retract_speed = 65
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG90 ; use absolute coordinates\nG21 ; set units to millimeters\nG92 E0\nM82 ; use absolute distances for extrusion\nM109 S190 ; wait for temperature to be reached\nG1 E10 F400 ; prime the nozzle
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

printer/kurze Pause.ini

@@ -0,0 +1,42 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+fan_percentage = 0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = G4 S2
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.5
+octoprint_apikey = 
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0.1
+retract_restart_extra_toolchange = 0
+retract_speed = 65
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG90 ; use absolute coordinates\nG21 ; set units to millimeters\nG92 E0\nM82 ; use absolute distances for extrusion\nM109 S190 ; wait for temperature to be reached\nG1 E10 F400 ; prime the nozzle
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

printer/new_extruder.ini

@@ -0,0 +1,42 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nG1 X100 Y180 F1000   ; go to end position\nM84     ; disable motors
+extruder_offset = 0x0
+fan_percentage = 0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.4
+octoprint_apikey = 7C33C4DFB034403CA49FF5E1E8E0A5E3
+pressure_advance = 0
+print_host = localhost:5000
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0.1
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG90 ; use absolute coordinates\nG21 ; set units to millimeters\nG92 E0\nM82 ; use absolute distances for extrusion\nM109 S[first_layer_temperature] ; wait for temperature to be reached\n;G1 Z5 F5000 ; lift the nozzle\nG1 E10 F400 ; prime the nozzle
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

printer/ohne heizung.ini

@@ -0,0 +1,42 @@
+# generated by Slic3r 1.3.1-dev on 2020-04-22 16:41:13
+bed_shape = 0x0,200x0,200x200,0x200
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+fan_percentage = 0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = 
+max_layer_height = 0.3
+min_layer_height = 0.15
+nozzle_diameter = 0.5
+octoprint_apikey = 
+pressure_advance = 0
+print_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0.1
+retract_restart_extra_toolchange = 0
+retract_speed = 65
+serial_port = 
+serial_speed = 250000
+start_gcode = G28 ; home all axes\nG90 ; use absolute coordinates\nG21 ; set units to millimeters\nG92 E0\nM82 ; use absolute distances for extrusion\nM109 S190 ; wait for temperature to be reached\nG1 E10 F400 ; prime the nozzle
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0

slic3r.ini

@@ -0,0 +1,38 @@
+# generated by Slic3r 1.3.1-dev on Wed Apr 22 18:47:02 2020
+autoalignz = 1
+autocenter = 1
+background_processing = 1
+color_toolpaths_by = role
+colorscheme = getDefault
+invert_zoom = 0
+last_output_path = /home/lukas/tmp
+last_version_check = 1577913133
+main_frame_maximized = 1
+main_frame_pos = 0,25
+main_frame_size = 2560,1055
+no_controller = 1
+nudge_val = 1
+object_settings_maximized = 
+object_settings_pos = 784,217
+object_settings_size = 1000,700
+reload_behavior = 0
+reload_hide_dialog = 0
+reload_preserve_trafo = 1
+rotation_controls = z
+show_host = 
+tabbed_preset_editors = 1
+threads = 10
+version = 1.3.1-dev
+version_check = 1
+
+[octoprint]
+overwrite = 1
+
+[presets]
+filament = thin_gray
+print = 2020
+printer = new_extruder
+
+[recent]
+config_directory = /home/lukas/tmp
+skein_directory = /home/lukas/tmp